COMP Cams 3 Bolt FSL Hydraulic Roller Camshaft, 210/218 2010-2015 Camaro SS Manual

Features:

• 30+HP Gain with No Mods
• Works with Stock Components and Tune
• 50 State Legal (CARB EO # D-279-13)

Specs:

• Grind Number: LS3LX270
• RPM Operating Range: 1,800-6,500
• Cam Type: Hydraulic Roller
• Lifter Style: Hydraulic Roller
• Camshaft Series: FSL
• Camshaft Gear Attachment: 3 Bolt
• Camshaft Material: Billet Steel
• Usage: Street / Performance
• Valve Springs Required: No
• Advertised Intake Duration: 270
• Advertised Exhaust Duration: 270
• Intake Duration at .050" Lift: 210
• Exhaust Duration at .050" Lift: 218
• Intake Valve Lift: 0.570"
• Exhaust Valve Lift: 0.541"
• Lobe Separation: 118

The COMP Cams FSL series camshafts gain 30+ HP with no other mods and are the first performance aftermarket camshaft for LS engines that meets the stringent CARB approval. This roller cam works with stock components and tune.

Note: This cam will require 3 bolt sprocket and installation gasket kit for proper installation and operation.

Note: To use this cam in an L99 engine you will need the L99 to LS3 conversion kit to properly operate this cam in the L99 engine. A torque converter will also be necessary to prevent any surging once the cam is installed.

Suggested Products to Upgrade (these are only suggested and not necessary for this cam):
Lifters: OE-Style Hydraulic Roller 850-16 or Reduced Travel 875-16
Rocker Arms: Upgraded OEM 1478-16 or Ultra Gold 19028-16
Pushrods: Hi-Tech Ball Tip 7955-16 or Hi-Tech Formed Tip 8406-16
Beehive Valve Springs: 26918CS-KIT
Dual Valve Springs: 26925TS-KIT

Warranty Information (opens in new tab): Click HERE

Emissions Disclaimer: This item IS CARB Legal (EO# D-279-12) and is available to ship to California.

Part Number: 54-103-11