Nitrous Outlet Hardline Plate System, 10lb Bottle 2010-2015 Camaro SS

Features:

• Throttle Opening: 83mm
• System Type: Plate
• System Style: Wet
• Bottle Size: 10lb Bottle
• Bottle Material: Aluminum
• Bottle Color: Black
• System Stage: Single
• System Flow Per Stage: 200 hp
• Max Flow Per Stage: 400 hp
• Main Fuel Line Size: 6AN
• Includes Jetting for 70-100-150-200 hp
• Hardline System
• Designed to Work with the Factory Throttle Body and Intake Manifold
• E85-Compatible with Different Jetting

Superior Atomization:

This injection plate has 6 specially designed nitrous and fuel discharge ports that completely saturate the air intake charge with the best atomized mixture possible. For higher horsepower levels proper distribution into the air stream is critical for even cylinder to cylinder distribution.

Wet Nitrous Plate:

This system includes a billet aluminum plate to fit 90mm LSX intakes and is capable of flowing up to 400 HP of nitrous. Each billet plate has a black anodized finish with CNC engraved logo and fuel/nitrous labels.

Vehicle Specific:

Nitrous Outlet vehicle specific nitrous systems are the safest, best fitting, and most tuner friendly systems available. This system is designed to specifically fit the stock Camaro 90mm Intake, including vehicle specific solenoid brackets, custom pre-bent hardlines, and application specific hardware for the best fitment and cleanest, easiest install on the market.

Complete System:

This system includes all of the necessary components; billet aluminum nitrous plate, 50-100-150-200 HP jetting, hardware, and wiring to properly install a wet nitrous system on your vehicle.

Flow Up To 400HP:

This system comes out of the box with everything you need to spray 200HP, but can spray up to 400HP with additional jetting.

Wide Open Throttle Activation:

This system includes a wide open throttle (WOT) switch that only allows the system to be activated when the motor is at full throttle. This safety feature will help prevent engine damage and lean spikes.

Application:

This system is specifically designed to fit the Factory 90mm Camaro intake manifolds.

Installation Instructions (opens in new tab): Click HERE

Part Number: 00-10119-90-10