Planted Seat Bracket, Driver Side
*Fits: 2014-2019 C7 Corvette (excluding ZR1) with Seat Belt Tab on Inboard and Outboard Side The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. They bring each vehicle into their development center so they can create the best fitting, bolt in, seat bracket possible.
Features: - Hand Welded, Laser Cut from 3/16" Steel
- Black Powder Coat Finish
- Pre-Slotted with Hole Patterns
- Driver / Left Side
- Made in the USA
Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat and specifically fitted for your C7 Corvette. Each Planted Seat Bracket goes through three levels of quality control to ensure Planted Technology's high standards are met.
Notes:*Professional installation is recommended
*Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use.
Installation Instructions (opens in new tab): Click
HERE Warranty Information (opens in new tab): Click
HERE
Part Number: SB250DR