Halltech Hornet Cold Air Intake 2020-2024 C8 Corvette Coupe

Features:

• Direct CAI replacement requires no modifications and no tuning.
• Dynoed at 17+ increase in horsepower and 25+ increase in torque on the Stringray. Results have varied in the industry.
• The stainless backplate ensures all harness fasteners and the antenna are attached in their factory locations.
• Reuses your stock t/b connector hose, pcv fitting, left and right inlet ducts, and mounting bolts.
• Blue-Bee dry nano filter has over 600 square inches of filtration (made by Attack Blue)
• Molded-in velocity stack and reverse flow partition ensures laminar flow at the MAF sensor filter box is made from military grade XLPE
• Patent pending
• Engineered and designed for the E-Ray & the Stingray Coupe and HTC (the only modification required for the HTC is to simply drill-out the top center rivnut on the access panel)

Halltech's Hornet Cold Air Intake System is the hottest mod you can add to your C8 Corvette. This cold air intake increases the amount of cool air flowing into the engine, improving performance and boosting engine power. Dyno tested, Halltech increased the stock Corvette by 17HP and 25lbs-ft. torque.

Notes:
*Reuse your stock t/b connector hose, PCV fitting, left and right inlet ducts, and mounting bolts
*Actual lid partition may be slightly different (ramp vs funnel) on production units
*Will not fit the hard top convertible without modifications to the cover under the trunk carpet

Part Number: HRNT.518