Driveshaft Shop 3.5'' Aluminum Driveshaft 2012-2015 Camaro ZL1 Manual

Details:

• Driveshaft Diameter: 3.500 in.
• Driveshaft Material: Aluminum
• Driveshaft Style: One-piece
• Transmission Type: Manual
• Balanced: Yes

Features:

• Direct Bolt-In
• Billet Aluminum Construction
• 300m Stub System
• 12.9 Strength Hardware
• Made in the USA

Available for the 2012-2015 Camaro ZL1 is Driveshaft Shop 3-1/2 aluminum shaft with CV . They have done extensive testing with stock rears and with their 9″ kit and believe this to the the most cost-effective trouble-free driveshaft for the Camaro available today. The shaft will come with Driveshaft Shop signature billet plates for each end so you don’t have to go into the rear taking a chance on upsetting the crush collar (see below for billet plate VS changing to a Pinion yoke). Driveshaft Shop shaft comes with a 300m stub system mounted to a billet aluminum plate to ensure not only strength but lighter weight than the normal way of doing this type of end (look closely at the CV end, it’s not all steel). The shaft only weighs 17lbs and comes with special grade 12.9 extra strength hardware with back up lock nuts to ensure no loose bolts. They have been using this billet aluminum style plate for over 10 years on thousands of 1000+Hp applications without any bolt issues.

Attention: 

In hopes to make your purchase with Phastek a pleasant one, we would like to inform you that ALL DriveShaft Shop products ship signature required. Once we have updated you with the tracking number from our shipping department please make note of the estimated delivery date. This information will inform you when the package is expected to be delivered to your residence or place of business. Please make arrangements to ensure someone will be present at the delivery address on the delivery day to sign for the package or contact the carrier to have them hold the package at the closest sorting facility for pick up.

The carrier will make 3 attempts to deliver the package to the address provided. During those attempts they will leave notices that they are trying to deliver a package, if arrangements can not be made then you can call to have the package held at the nearest sorting facility for pick up. On the 3rd attempt, if the package is not delivered it will be sent back as "Undeliverable".

Note: You will have to remove the heat shield from above center hanger mount to install a 3-1/2″ shaft. There is a possibility of clearance issues with aftermarket exhausts. This is a general warning. We have 9 test shafts out and not one had an issue. I have listed this because not all exhaust systems have been tested.

Part Number: GMCAZL1-M-A