DSX Flex Fuel Kit 2010-2015 Camaro SS, SS/1LE & Z28

Features:

• Corrosion Resistant Plumbing Material
• Plug and Play Wiring Harness
• Factory Style Harness Connectors with Weather Pack Seals
• Genuine GM Flex Fuel Sensor
• DSX Tuning 3D Printed Fuel Line Disconnect Tool

 

 

The DSX Flex Fuel System for 2010-2015 Camaro SS is the ultimate fuel system upgrade for your car. With this system, you can run any combination of gasoline and ethanol, from pure gasoline to E85 and everything in between. The system includes a high-quality GM Ethanol content sensor and a plug-and-play wiring harness that makes installation a breeze.

 

This flex fuel system is fully calibrated and tested to work seamlessly with your Camaro's factory engine management system. It allows you to take full advantage of the increased power and torque that ethanol blends can provide. Simply fill up with your desired fuel blend and the system will automatically adjust the fuel delivery to optimize performance.

 

 

Tuning Tips (verify tables below with your tuner): For enabling flex fuel the table below will need to be adjusted. DTCs P0178 and P0179 will need to be set to MIL On First Error, and SES Enable should be checked by tuner.

 

[ECM] 201 - Enabled

[ECM] 20220 - Sensor

[ECM] 3133 - 100%

[ECM] 3146 - 1%

[ECM] 220 - Enable

 

 

Note: Tune is required but without the tune you will not have the ability to switch fuels until functionality is active with the ECU. HP Tuners or EFI Live tune required. Check engine light maybe present without tune.

 

 

Part Numbers: 10SS