Dyno-Proven Maximum Gains Up to 7 WHP and 10 WTQ on a Stock Tune
31% Greater Internal Volume than Stock
Aluminum Intercooler Pipe Replaces Weak Stock Plastic and Rubber Pipe
Utilizes Stock Quick-Disconnect Fittings for Easy Installation
2.75" Polished Mandrel-Bent Aluminum Piping
CNC-Machined Port for Stock Sensor Connection
Pre-Welded NPT Port Allows for Quick Install of Aftermarket Meth Injection or Boost Gauge
Includes Mishimoto Silicone Coupler and Mishimoto T-Bolt Clamps
Mishimoto Lifetime Warranty
Expose your 2.0T LTG engine to improved airflow with the Mishimoto Cold-Side Intercooler Pipe Kit for the 2016+ Chevrolet Camaro. The stock intercooler pipe is plagued by bends and a restrictive diameter. Both slow the airflow to your intercooler. The stock piping is also constructed of plastic and rubber, which will deteriorate over time. The Mishimoto intercooler pipe, on the other hand, is constructed of mandrel-bent aluminum and has a 2.75" diameter to minimize any airflow restrictions. This pipe can handle the power you throw at it when you're turning up the boost on your LTG.
Plastic is a material Mishimoto always strives to replace with our products, and the stock cold-side intercooler pipe needed some work. Half of the stock cold-side pipe is constructed of plastic, which is prone to cracks and leaks. The Mishimoto cold-side pipe is a single section of mandrel-bent, aluminum piping featuring a CNC-machined sensor flange for use of the stock pressure sensor, a port for methanol injection, or a port for a boost gauge sensor.
Mishimoto's cold-side Camaro 2.0T intercooler pipe also includes a durable 90-degee silicone coupler and stainless steel T-bolt clamps to ensure a leak free connection. Installation can be completed without modification to the engine bay as it is compatible with the stock intercooler. The Mishimoto cold-side intercooler pipe comes in a polished finish, and like all our Camaro 2.0T performance parts, includes the Mishimoto Lifetime Warranty.
Interested in buying both the cold and hot side pipes? Click here for the set
Note: There is an O-ring inside of the stock intercooler pipe on the end that connects to the intercooler. This O-ring must be removed and installed into your Mishimoto intercooler pipe. Take note when removing it from the stock pipe as the O-ring must be installed in the correct direction.
Note: The cold side pipe connects from the intercooler to the throttle body. See installation video and pdf for visual.
Note: 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M)
Emissions Disclaimer: This product is NOT CARB legal and CAN NOT ship to California.
Features:
Dyno-Proven Maximum Gains Up to 7 WHP and 10 WTQ on a Stock Tune
31% Greater Internal Volume than Stock
Aluminum Intercooler Pipe Replaces Weak Stock Plastic and Rubber Pipe
Utilizes Stock...
Features:
Dyno-Proven Maximum Gains Up to 7 WHP and 8 WTQ on a stock tune
29% Greater Internal Volume than Stock
20% Increase in Flow
Aluminum Intercooler Pipe Replaces Weak Stock Plastic and Rubber...
Features:
Dyno-Proven Maximum Gains Up to 11 WHP and 9 WTQ on a Stock Tune
30% Greater Internal Volume than Stock
10% Increase in Flow
Aluminum Intercooler Pipes Replace Weak Stock Plastic and...
Features:
2" Thick Intercooler Design Optimized for Maximum Airflow with Minimal Pressure Drop
45% Increase in Internal Core Volume
239% Increase in External Fin Surface Area
78% Increase in Core...
Features:
Dyno-Proven Maximum Gains Up to 7 WHP and 8 WTQ on a stock tune
29% Greater Internal Volume than Stock
20% Increase in Flow
Aluminum Intercooler Pipe Replaces Weak Stock Plastic and Rubber...
Features:
Dyno-Proven Maximum Gains Up to 11 WHP and 9 WTQ on a Stock Tune
30% Greater Internal Volume than Stock
10% Increase in Flow
Aluminum Intercooler Pipes Replace Weak Stock Plastic and...
Details:
Reduces Oil Temperatures by Up to 35°F
Minimal Pressure Drop
Application-Specific Mounting Brackets
Premade Braided Stainless Steel Oil Lines with Durable -AN Fittings
Includes Billet...
Features:
2" Thick Intercooler Design Optimized for Maximum Airflow with Minimal Pressure Drop
45% Increase in Internal Core Volume
239% Increase in External Fin Surface Area
78% Increase in Core...