Mishimoto Performance Cold Air Intake, Red 2016-2023 Camaro 2.0T

Details:

• Box Type: Open Box
• Filter Type: Oiled
• Filter Color: Red
• Tube Material: Silicone
• Tube Color: Red
• Tune Required: No

Features:

• Provides Max Gains of 18 WHP / 22 WTQ While Maintaining Safe A/F Ratios
• Wire-Reinforced Silicone Elbow Eliminates Restrictions and Improves and Increases Airflow Capacity
• Extremely Aggressive Intake Tone Under Acceleration
• Heat-Resistant, Glass-Reinforced Nylon MAF Sensor Housing and Integrated Air Straightener Molded by Plastic Injection
• Powder-Coated Black Airbox Keeps Unwanted Hot Air from Entering the Air Filter
• Mishimoto High-Flow Oiled Air Filter Receives Maximum Airflow from the Front of the Vehicle
• Mishimoto Lifetime Warranty

The engineers at Mishimoto have put a lot of R&D hours into the Mishimoto Performance Intake for the 2016+ Chevy Camaro 2.0T. Several designs were planned and tested, but this one will truly wake up your LGT motor with the help of extra air surging through your system.

This kit fits all two-liter 2016 Camaros and will provide dyno proven performance gains of 18 hp and 22 ft-lbs of torque. They also improved pressure drop by 21%, giving you increased airflow over stock. The airbox is made of steel and powder-coated black to help fight air intake temperatures, while the MAF housing is made of a glass-reinforced, plastic-injected mold with a built-in air straightener. The intake elbow is made of a five-ply silicone with steel wire reinforcement to prevent misshaping under vacuum and keep the engine heat at bay.

The silicone design is an improvement over the bulky plastic intake elbow, replacing the stock sound suppression chamber attached to the turbo and giving you smoother airflow throughout. Hundreds of miles of road testing was performed to ensure the safety of running it on a completely stock motor, so no tune is required!

Includes:

• (1) Silicone Intake Elbow - Red
• (1) Plastic Injection Molded MAF Sensor Housing
• (1) High-Flow, Oiled Filter
• (1) Steel Airbox
• (3) Worm Gear Clamps
• Mounting Hardware

Pipe Material - Steel Reinforced Silicone
Airbox Material - Steel, Black Powder Coat
Heat Shield Material - Steel
Oiled Filter - 38g of oil on filter


 

Note: 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M)


 

Emissions Disclaimer: This Product is NOT CARB legal and CANNOT ship to California.

 

Installation PDF (opens in new tab): Click HERE

Part Number: MMAI-CAM4-16RD