Mishimoto Performance Cold Air Intake, Red 2016-2024 Camaro SS

Features:

• Box Type: Open Box
• Filter Type: Oiled
• Filter Color: Red
• Tube Material: Silicone
• Tube Color: Red
• Tune Required: No
• Provides Max Gains of 14 WHP / 14 WTQ while Maintaining Safe A/F Ratios
• Wire-Reinforced Silicone Elbow Eliminates Restrictions and Improves and Increases Airflow Capacity
• Extremely Aggressive Intake Tone Under Acceleration
• Heat-Resistant, Glass-Reinforced Nylon MAF Sensor Housing and Integrated Air Straightener Molded by Plastic Injection
• Powder Coated Black Airbox Keeps Unwanted Hot Air from Entering the Air Filter
• Mishimoto High-Flow Oiled Air Filter Receives Maximum Airflow from the Front of the Vehicle
• Mishimoto Lifetime Warranty

Does the 2016-2021 Camaro SS need more power? Of course it does. Why would that ever be a question? The Mishimoto engineers know this, and as soon as our Camaro SS arrived, they got started on intake development. The engineering team went through multiple prototypes to make sure this Camaro intake flows massive amounts of air straight into the throttle body. The tight space constrictions make it difficult to fit such a large intake without running into the radiator, but the Mishimoto engineers developed a design that fits perfectly. It features a huge five inch diameter inlet pipe, making it our largest intake yet!

This Mishimoto Camaro intake generates max gains of 14whp and 14wtq while a symphony of bald eagles singing rings out as your foot nears the floor. The plastic injection molded MAF housing ensures proper airflow readings to keep your AFRs close to stock. This means you can run this intake without a tune, making it a true bolt-on upgrade. The silicone inlet pipe features steel wire reinforcement to prevent it from collapsing under load. Just like all Mishimoto Camaro SS parts, this intake comes with the Mishimoto Lifetime Warranty.

Includes:

• (1) Silicone Intake Elbow - Red
• (1) Plastic Injection Molded MAF Sensor Housing
• (1) High-Flow, Oiled Filter
• (1) Steel Airbox
• (1) Mounting Hardware
• (3) Worm Gear Clamps

Pipe Diameter - 5.00" (127mm) O/D
Pipe Material - Steel Reinforced Silicone
Airbox Material - Steel, Black Powder Coat
Oiled Filter - 38g of oil on filter

Note: 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M)

Note: This part is for off-road use only

Installation PDF (opens in new tab): Click HERE

Emissions Disclaimer: This product is NOT CARB legal and CAN NOT ship to California.

Part Number: MMAI-CAM8-16RD