Mishimoto Performance Intercooler Kit, Polished 2016-2023 Camaro 2.0T

Features:

• 2" Thick Intercooler Design Optimized for Maximum Airflow with Minimal Pressure Drop
• 45% Increase in Internal Core Volume
• 239% Increase in External Fin Surface Area
• 78% Increase in Core Size
• Cast End Tanks with Internal Air Diverter Provide Optimal Airflow Through Intercooler
• 30% Greater Internal Volume than Stock
• 10% Increase in Flow
• Utilizes Stock Quick-Disconnect Fittings for Easy Installation
• Pre-Welded NPT Port on Cold-Side Pipe Allows for Quick Install of Aftermarket Parts
• Polished Piping Finish
• Mishimoto Lifetime Warranty

It's time to give the intercooling system in your 2016+ Chevrolet Camaro 2.0T a complete overhaul with the Mishimoto Performance Intercooler Kit. The bar-and-plate constructed core picks up the slack for the stock unit by offering increased heat rejection characteristics, as well as a boost in airflow. On top of the new construction, the design increases the internal core volume by 45%, and offers a whopping 239% gain in external fin surface area, making sure that the charged air running through your LTG is as chilled as possible.

The kit includes a set of our mandrel-bent intercooler piping featuring a range of 2.25-2.75" diameters equating in a 30% increase in volume and 10% better flow of the charged air. All together, the piping kit gets your LTG powered Camaro up to 11 additional horsepower and 9 ft-lbs of torque. Also included, a pre-welded NPT port on the cold side piping that not only allows for easy installation of your stock equipment, but also adding an aftermarket boost gauge or meth-injection is a breeze. he Mishimoto Performance Intercooler Kit for your 2016+ Camaro is available in polished piping, and as always, this kit is covered under the Mishimoto Lifetime Warranty.

Includes:

• (1) Aluminum Intercooler
• (2) Aluminum Pipes w/ CNC-machined quick-disconnects
• (1) Aluminum Pipe w/ CNC-machined 2-bolt flange
• (2) Quick-Disconnect Spring Clips
• (1) 2.75" 90° Silicone Coupler
• (1) 2.25" to 2.5" Silicone Transition Coupler
• (1) 2.5" T-Bolt Clamp
• (1) 2.75" T-Bolt Clamp
• (2) 3" T-Bolt Clamps
• (3) Tree Clips
• Mishimoto Lifetime Warranty

Pipe Diameter - 2.25"/2.5"/2.75"

Core Thickness - 2"

Outlet - 2.40"

Inlet - 2.40"

Core Size - 21.65" x 17.15" x 2.09"

Max Rec. HP - 450

Note: There is an O-ring inside of the stock intercooler pipe on the end that connects to the intercooler. This O-ring must be removed
and installed into your Mishimoto intercooler pipe. Take note when removing it from the stock pipe as the O-ring must be installed in the correct direction. Please reference our installation video for additional information.

Emissions Disclaimer: This product is NOT CARB legal and CAN NOT ship to California.

Installation Videos

Installation PDF (opens in new tab): Click HERE

Part Number: MMINT-CAM4-16K