Morimoto XB LED Headlights 2014-2019 C7 Corvette

Details:

• Housing Finish: Black
• Lens Finish: Clear
• Bulb Type: LED

Features:

• Kuria Optic Bi-LED Projectors
• Intense White DRL w/ Dim Parking Light Function
• Fully Sequential LED Turn Signal
• Direct Factory Replacements
• ABS Plastic Housing
• UV-Resistant Polycarbonate Lens
• Momentive UVHC3000 UV Coating
• SAE, DOT, FMVSS108 Approved
• Sold as a Pair

PERFORMANCE: The low quality optics inside the factory C7 lights were not only poorly designed, but often lost 50% or more of their intensity over time due to de-lamination of the reflector bowl inside - leaving you with next to no light output to illuminate the road. The good news is that Morimoto's 2014-2019 Corvette headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light that will far out-perform the stock setup.

DOT APPROVED: Make no mistake, these will produce a much different and better result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical/lateral adjusters.

PLUG-N-PLAY: Wiring is easy too! This LED projector headlight kit is designed to work on your C7 Vette without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.

SEQUENTIAL LED DRL: Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. They have a fully sequential LED turn signal behind modern "3D" type optics on the outside edge of the headlight too.

WELL-BUILT: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Vette's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.

Note: NOT compatible on Non-US spec models.

Part Number: LF463