ReadyLIFT 2.25" Front Leveling Kit w/Control Arms 2014-2018 Silverado 1500 with Stamped Steel or Aluminum Control Arm Suspension

Features:

• Max Lift 2.25"
• Max Tire Diameter 33"
• CNC machined aircraft 6061-T6 billet construction
• Heavy-duty tubular steel upper control arms with heavy duty ball joints and maintenance free bushings
• Not for use with vehicles equipped with factory Air-Ride.
• Vehicles equipped with Magnetic Ride Control will require re-calibration.
• 1/2' wheel spacers may be required when using 285 or larger tire on the factory wheels

ReadyLIFT has engineered the perfect solution for leveling the 2014-2018 Chevrolet Silverado 1500 trucks. Chevrolet changed the upper control arms on the 1500 pickups to a stamped steel upper control arm that provides minimal structural support for the factory ball joint when in a lifted or leveled scenario. This has resulted in Chevrolet mandating no lift kits or leveling kits are to be installed on these new vehicles.

At ReadyLIFT their goal is provide accurate and safe lifting and leveling solutions. Their engineering team has developed the perfect leveling solution for these Chevrolet 1500 trucks that includes their popular CNC machined billet aircraft grade aluminum 2.25" leveling kit along with strong DOM-tube steel upper control arms. These control arms are a direct replacement for the factory stamped steel arms and includes their proprietary heavy-duty ball joints and an industry first maintenance free anti-resistance bushing assembly that is self lubricating and features a free-rotating inner sleeve. With this new leveling kit/control arm combination you can now level the 2017-2018 1500 trucks with assurance the vehicle will sit level, maintain the factory ride and you have the peace of mind you will never have the factory stamped steel control arm failure.

Note: To ensure proper leveling kit fitment, using a plumb bob line (for a clean vertical) to measure from the center of the wheel hub to the bottom edge of the fender at the 12 o’clock position while the wheels are pointing straight forward. If this measurement is greater than 22 then the truck already has some factory or aftermarket front lift compared to a base truck. For distances measuring greater than 22 as described above, #66-3086 or #66-3085 should be modified to account for the pre-installed lift. To ensure proper front lift height and suspension geometry, install the ReadyLIFT leveling kit WITHOUT the lower horseshoe spacer. Incorrectly using these kits on a truck with 22 or more distance may result in component interference and/or excessive wear.

Note: Not for use with cast steel suspension

Installation PDF (opens in new tab): Click HERE

Warranty Information (opens in new tab): Click HERE

Part Number: 66-3086