Features:
- Constant Stopping Power and Extreme Duty Durability
- Maximum Cooling for High Heat Durability
- Provides Braking Power for Ultra-Sized Wheels and Tires
- Factory Disc Spindle
- Directional Drilled and Slotted 16"" Rotors
- 6 Piston Black Power Coated Calipers
- Stainless Steel, Aluminum, and Iron Construction
TC6R calipers are purpose built to provide unsurpassed braking capacity on trucks and SUV’s upgraded to larger than stock wheels. TC6R kits can fit many 20” and larger wheels (Verify your wheel interior clearance to the wheel clearance diagram in the installation instructions before purchase). Combining the high clamping efficiency of the TC6R caliper with 16” diameter directional vane rotors and high friction BP-10 compound brake pads, TC6R kits provide the braking power necessary to control the higher rotating weight of ultra-sized wheels and tires, especially with high GVW vehicles and vehicles used for towing. TC6R kits are engineer application to be fully compatible with the OE master cylinder output and retain full function of the ABS system. *Brake lines will need to be purchased.
Specs
Calipers:
Type: | TC6R |
Finish Color: | Black Powder Coat |
Piston Count: | 6 |
Piston 1 Bore: | 1.75"" |
Piston 2 Bore: | 1.38"" |
Piston 3 Bore: | 1.38"" |
Piston Area: | 5.40"" |
Piston Type: | Stainless |
Mount Type: | Radial |
Brake Pad Area: | 13"" |
Brake Pad Volume: | 6"" |
Pad Compound: | BP-10 |
Rotors:
Type: | SRP Drilled Rotor |
Style: | SRP Drilled & Slotted |
Surface Finish: | Black Electro Coat |
Material: | Spec-37 Iron |
Outside Diameter: | 16"" |
Width: | 1.38"" |
Vane Count: | 60 CV |
Design Type: | SRP-BLK |
Bedded: | No |
Dynamically Balanced: | Yes |
Rotor Hats:
Type: | Truck Hat - Standard |
Material: | Aluminum |
Finish Color: | Black E-Coat |
Hat Offset Dimension: | 0.810"" |
Bolt Circle 1: | 6 x 5.50 |
Stud Diameter BC-1: | 0.630"" |
Note: Brake lines will need to be purchased (choose an option). Click here to view more information about the Wildwood Flexlines.
Note: THIS BRAKE KIT HAS A HUB OFFSET. This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
Note: The minimum wheel requirement is 20"". Please check the wheel clearance diagram for details.
Part Number: 140-8992-D