aFe Power Black Series Carbon Fiber Cold Air Intake System With Pro Dry S Filter, Dry 2020-2024 C8 Corvette

Features:

• Dyno-Proven Gains up to +5 HP and +4 Lbs. x Ft. TQ
• Outflows Factory Intake by 5%
• Measured Flow: 550 CFM @ 7" H20
• Dyno-tuned lightweight 100% carbon fiber tube
• Dual 360-degree radial flow dry (oil-Free) air filters
• Heat resistant housing that enclosed the dual air filter set up
• Carbon Fiber cover for an aggressive look
• Custom aFe POWER laser etched stainless steel washers and bolts
• Premium silicone couplings and hardware

Large Three Layer Performance Air Filters:
Dual 4” Flange 360-degree radial flow air filters feature aFe oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Their inverted tops make for more filter surface area, resulting in longer service intervals.

Carbon Fiber Intake Tube:
Lightweight twill weave carbon fiber tube directs the filtered air from the dual air filters to the engine. It is computer designed and dyno tested to increase air flow while reducing weight and enhancing the visual appearance of the engine bay. The tube is manufactured out of 100% carbon fiber material (No fiberglass).

Heat-Resistant Housing:
The dual air filters are surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory mounting location. The housing connects to the factory air inlets on each side of the vehicle to capture the coolest air available. Silicone bellow couplings are used for engine movement and easy installation. All the factory harness and mounts are transferred to the back of the aFe POWER housing for a factory like installation. The radio antenna plastic melded on the factory air box is also transferred to the aFe POWER housing. The removal of the antenna from the factory air box requires two plastic melted mounting tabs to be cut off.

Carbon Fiber Cover:
This unique carbon fiber cover is also lightweight high gloss clear-coated twill weave carbon fiber and closes off the housing from unwanted hot engine air. It features a Black Series emblem for authenticity and is secured to the housing using aFe POWER laser etched washers and bolts. This cover will greatly enhance yaFe engine bay appearance.

Premium Hardware:
Premium stainless steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Part Number: 57-10007D