Features: Fits 2016-2024 Camaro SS w/ Gen V 6.2L LT1 engines Modular Design w/ Removable Top Overall Height: 13.34" (w/ EFI Top - 95mm or 105mm) - See Drawing A-B Height: 12.10" (w/ Carb Style Top - 2 x 4150 or 2 x 4500) - See Drawing Height at Plenum...

Features: Fits 2016-2024 Camaro SS w/ Gen V 6.2L LT1 engines Modular Design w/ Removable Top Overall Height: 13.34" (w/ EFI Top - 95mm or 105mm) - See Drawing A-B Height: 12.10"(w/ Carb Style Top - 2 x 4150 or 2 x 4500) - See Drawing Height at Plenum...

Features: OE on all 2015-2020 Shelby GT350 and GT350R Mustangs Increases Airflow to Deliver More Performance Designed to Offer Peak Power at 7500rpm Pre-Assembled with Charge Motion Control Valves Made from Light-Weight Composite Material Includes New...

Features: Direct replacement for 2018-2023 Mustang GT Fits 2011-2017 5.0L Coyote engines (requires custom calibration) Improved horsepower and torque in Gen 1/Gen 2 engines     The Ford Performance Intake Manifold (M-9424-M50C) is a factory...

Details: Finish: BLACK Manifold Material: CAST ALUMINUM Fuel Rails Included: NO Manifold Port Style: LS3/L99 - SQUARE PORT Engine Type: Gen III/Gen IV LS Manifold Fueling Style: EFI   Features: O-Ringed Port Openings and Lid Surface Operating...

Kit Contains: 24" MAP Extension Harness 3ft of Vacuum Hose 2ft intended for the intake to vacuum booster line 1ft intended to extend the factory PCV hose Straight Brass Fitting, 3/8" x 1/4" NPT     This kit is required when installing the...

Features: Dyno test shows 36 HP AT THE REAR WHEELS over the competition as tested on a LPE L28 Camaro. Polymer material resists heat soak and minimizes weight. 103mm Throttle bore allows the use of large throttle bodies for greater air flow. Direct flow...

Features: Dyno test shows 36 HP AT THE REAR WHEELS over the competition as tested on a LPE L28 Camaro. Polymer material resists heat soak and minimizes weight. 103mm Throttle bore allows the use of large throttle bodies for greater air flow. Direct flow...

Features: Designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient air flow paths. The two-piece manifold design provide convenient access to the runners for porting. Direct flow path runner design promotes...

Features: Color: Black Material: Aluminum Logo Type: Sniper Bore Diameter (IN): 3/8 Inch Rail End Thread Size: 1/2 Inch (-8 AN ) Includes Fittings: Yes Includes Hardware: Yes Quantity: Set Of 2     Holley...

Features: Black Finish creates stealthy under-hood styling 3mm (1/8") thick T6061 sheet aluminum construction for maximum durability 102mm throttle bore opening for increased air flow 100% TIG welded for strength and durability Includes 3/8" Fuel rail...

Features: Black Finish creates stealthy under-hood styling 3mm (1/8") thick T6061 sheet aluminum construction for maximum durability 92mm throttle bore opening for increased air flow 100% TIG welded for strength and durability Includes 3/8" Fuel rail...

Features: Silver Finish creates stealthy under-hood styling 3mm (1/8") thick T6061 sheet aluminum construction for maximum durability 92mm throttle bore opening for increased air flow 100% TIG welded for strength and durability Includes 3/8" Fuel rail...

Features: Black Finish creates stealthy under-hood styling 3mm (1/8") thick T6061 sheet aluminum construction for maximum durability 102mm throttle bore opening for increased air flow 100% TIG welded for strength and durability Includes 3/8" Fuel rail...

Features: Black Finish creates stealthy under-hood styling 3mm (1/8") thick T6061 sheet aluminum construction for maximum durability 92mm throttle bore opening for increased air flow 100% TIG welded for strength and durability Includes 3/8" Fuel rail...

Features: CNC Machined Aluminum Substantial Fuel Flow Increase Hi-Flow Performance Replacement Holley LS Hi-Ram Fuel Rail Adapter Kit is designed for use with the Holley Hi-Ram line of LS intake manifolds...

Features: 8.420 in. Base Plenum Height (Top of Intake Base Mounting Flange to Valley Cover Flange on Block) 12.32 in Overall Height (Top of Plenum to Valley Cover Flange on Block) Throttle body flange location is 8.420 in. height from valley cover...

Features: 8.420 in. Base Plenum Height (Top of Intake Base Mounting Flange to Valley Cover Flange on Block) 12.32 in Overall Height (Top of Plenum to Valley Cover Flange on Block) Throttle body flange location is 8.420 in. height from valley cover...

Features: Runner Length - 6.29", As-Cast Runner Cross-Sectional Area - Tapered 4.67in² to 2.84 in² Throttle Body Flange Location, with 92/102mm EFI Plenum Top : Height - 8.42" (from engine block lifter valley cover flange), Longitudinal...

Features: Runner Length - 6.29", As-Cast Runner Cross-Sectional Area - Tapered 4.67in² to 2.84 in² Throttle Body Flange Location, with 92/102mm EFI Plenum Top : Height - 8.42" (from engine block lifter valley cover flange), Longitudinal...

Features: Base Plenum Top Mounting Flange Height - 8.42" to the lifter valley cover flange on engine block. Total Height with 92/105mm EFI Plenum Top - 12.32" to the lifter valley cover flange on engine block. Port Size - 2.49" Height x 1.21"...

Features: Base Plenum Top Mounting Flange Height - 8.42" to the lifter valley cover flange on engine block. Total Height with 92/105mm EFI Plenum Top - 12.32" to the lifter valley cover flange on engine block. Port Size - 2.49" Height x 1.21"...

Features: Base Plenum Top Mounting Flange Height - 8.42" to the lifter valley cover flange on engine block. Total Height with 92/102mm EFI Plenum Top - 12.32" to the lifter valley cover flange on engine block. Port Size - 2.49" Height x 1.21"...

Features: Base Plenum Top Mounting Flange Height - 8.42" to the lifter valley cover flange on engine block. Total Height with 92/102mm EFI Plenum Top - 12.32" to the lifter valley cover flange on engine block. Port Size - 2.49" Height x 1.21"...