Soler Performance Ported Throttle Body, 103MM LT1 / LT2 / LT4 / LT5 / LS2 / LS3 / LSA

PERFORMANCE:

• Wide-open throttle flow: 1600 +/- 50 SCFM @ 20” H2O at WOT.
• Designed for drivability; no tune required (highly recommended for optimal performance).
• Max Area ETC scalar : 5396mm²
• Max Geometric/Flow Area: 7466mm² (do not use as area scalar in tune)
• Fully tested before shipping for sensor and motor operation, response time, and airflow.

FEATURES (103MM):

• Body and Sensors calibrated as a match set, zero intrinsic calibration issues
• Porting Taper and Upstream Bore with Velocity Stack (Lip & Bore Reduction)
• 16 Ra Microinch, Diamond Polished Surface Finish (Lower Skin Friction)
• Dimpled Pattern on shaft trailing edge.
• Dual-purpose hole pattern, the innermost part provides a direct fit to the MSD and all LT1/2/4 manifolds/superchargers, or aftermarket superchargers.
• The outermost provides a direct fit to the LT5 (ZR1) supercharger.

BENEFITS:

• Essential component in high-performance engine modification, with exceptional high flow capacity
• Lower weight to power ratio at part throttle, for a more nimble/spirited driving experience
• Linearization and smoothing of the curve for a more predictable response and crisper shifts
• Immediate response right off idling while keeping idling function undisturbed (No Hesitation/Stumble)
• Does not require tuning to run, but tuning is highly recommended for optimal performance
• No drivability, idle, tuning, or similar issues relating to similar-sized throttle bodies.
• More air/power at every single throttle position after idle.
• Easy Installation

Rev up your vehicle's performance with the Soler Performance Premium Throttle Body, custom-engineered for Chevrolet models. Featuring a calibrated, ported, and modified build, this throttle body promises enhanced airflow and improved engine efficiency.

No drilling is required for installation, and no tuning is needed, making it a hassle-free performance upgrade. Its polished finished surface adds a sleek touch to your engine bay. This product comes fully tested and guarantees proven performance gains for your Camaro, Corvette, Cadillac or GM 6.2L Truck offering a substantial improvement over the factory setup.

Emissions Disclaimer: This product is NOT CARB legal and CAN NOT ship to California.

Fits: 

 

6.2L - LT1, LT2, LT4, LT5, L86, L87, L96

• Corvette 7, and 8 (2014+)
• Camaro 6 SS/ZL1 (2016+)
• CTS-V 3 (2016+)
• GM 6.2L Trucks/SUV's (2014+)

6.2L/7.0L engines LS2/LS3/LS7 (2005-2008)

• Corvette 6 (2005 - 2008)
• Pontiac GTO (2005-2006), and G8 (2008-2009)
• Cadillac CTS-V (2006-2007)

6.2L/7.0L engines (LS3/LS7/L76/L99)

• Corvette 6, Base/GS/427/Z06 (2009 - 2013)
• Camaro 5 , SS/Z28 (2010 - 2015)
• Chevrolet SS (2014-2017)
• Pontiac G8 GT/GXP (2008-2009)
• CTS-V (2009-2015)

6.2L V8 Supercharged (LSA or LS9)

• Corvette 6th Gen. ZR1 (2009-2013)
• Camaro 5th Gen. ZL1 (2012-2015)
• CTS-V (2009-2015)
• Escalade (2009-2015)
• Silverado/Sierra (2009-2013)
• Suburban/Yukon (2009-2013)

Part Number: SE1000-103