Solo-Performance Mach-X-LLT Cat-Back Exhaust w/J-Pipes 2010-2011 Camaro V6

Features:

• System Type: Cat-Back
• Muffler Type: Mach-X
• Tip Size: 4.5 Inch
• Tip Finish: Polished
• Tip Style: Beveled
• Tip Quantity: 2
• System Material: T409 Stainless Steel
• Pipe Diameter: 2.25 Inch
• Madrel Bent Tubing
• Heavy-Duty Reinforced Hangers
• Direct Bolt-On

The Mach X-LLT exhaust kit for your V6 Camaro, Auto or Standard, is a full stainless steel unit. The muffler and tips are T304 and the pipes are T409. The band clamps we use are T304 as well. There is a lot going on in this exhaust kit to get the Camaro V6 to sound like it should. First we have a special Solo X design Mach free flow muffler in the front. As with most X pipes, this X muffler doesn’t inhibit the flow and does a great job of calming the noise. We also have a rear set of free flow Mach resonators in the tailpipe section. These resonators are the same free flow resonators used in our V6 Res-Cats and reduce as well as calm the overall exhaust note.

They have adjustable “attenuation pipes” or “J-pipes” in the tailpipes too. These J-pipes are “tuned” to take out the bad frequency ranges that both the V6 Auto and Standard have. Fortunately the frequency range was the same and the J-pipes can be used on either car with the same success. They make the J-pipes adjustable and removable to give you options. To adjust the length you would loosen the end band clamp bolts and move in or out the same on both sides. ½” to 1” makes a big difference in sound. The pipes are set at the “factory preset” length but since all Camaro’s are not made exactly the same we make them adjustable.

Installation Instructions (opens in new tab): Click HERE

Part Number: 993902SL